A long way home kindle how to#
A long way home kindle drivers#

Select “Configure SATA as” and choose “IDE.”.To do this, follow the instructions below: You can do this by making some changes in BIOS.

Restart your computer and check to see if the drive is now showing in BIOS.Īnother option to get BIOS to recognize your drive is to update your storage control driver.

Wait for the formatting process to complete.

Here you can designate if it’s the primary drive and what types of data should be assigned to it.

From the dropdown menu, select “Format.”.

Locate your drive and right-click on its name.

The “Disk Management” window will open.

Type “ diskmgmt.msc” and press the enter key.

Tap “Start,” type in the word “Run,” and hit enter.

A long way home kindle how to#

To learn how to format your drive, follow these steps: Thankfully, formatting is a simple procedure. If your drive isn’t formatted, BIOS won’t be able to recognize it.

Locate the “Driver” tab and tap “Update driver.”Īfter following the above steps, reboot your computer and check to see if the drive now shows in BIOS.

Right-click on the device with the yellow exclamation point.

If this is the case, follow the steps below to try and rectify the problem. If there’s an issue with the drive, you’ll see a small yellow exclamation point beside its icon.

Click “Search automatically for updated driver software.”.

From the dropdown menu, tap “Update Driver Software.”.

Select your drive and right-click on it.

Choose “Device Manager” and expand “Disk Drives” by tapping on the arrow just to its left.

Click “Start,” type “device manager,” and hit the enter key.

To learn how to update your drivers, follow these steps:

A long way home kindle drivers#

Updating drivers should always be done when installing new components.

Outdated or incompatible drivers could cause your new drive to not show up in BIOS. Update DriversĪn often forgotten but necessary part of installing a new drive is to ensure that your motherboard has the most updated driver installed. Damaged cables are often the issue and are easily replaced. If the cables appear damaged or were severely bent, replace them and reinstall the drive. Check to see that the cables don’t have any extreme creases or bends in them.Reinstall the cables and make sure they click or snap into place.Take a look at the motherboard connector pins to ensure they aren’t bent, broken, or damaged.